| Technical Detail | Special Features | Material Composition |
| H.P.-1.00 to 10.00 | Max. Head-63 Mtrs. | M 45-Nickel : 0.17 to 0.20 %, Carbon : 0.30 to 0.45 %, Silicon : 1.37 to 1.75 %, Copper : 0.15 to 0.20 % |
| Phase-Three | Max. Discharge-70,000 LPH | Alu.-99.98 % Purity |
| Max. Amps. Range-7 A. to 27 A. | Pump Seal-Oil Seal | Copper-99.99 % Purity. |
| RPM-2880 | Working at Seal Temp.-80oC | S.S. 410-Carbon 0.15 %, Silicon : 1 %, Chromium : 11./13 % |
| Suc. Size-65mm to 80 mm | Working at Water Temp.-45oC | Cast iron-FG 250 Grade, Carbon : 3.20 to 3.60 %, Silicon : 1.8 to 2.20 % |
| Del. Size-50mm to 65 mm | Winding-Copper (P.V.C. Insulated) | Counter-S.S. 202 (Hardness 45 to 50) |
| Body Temperature-max. 30oC to 45oC | Rotor-Alu. Pressure Die Cast | Thrust Pad-Industrail Polymers : 67 %, Carbon : 33 % |
| Voltage Fluctuation : +15%, -20% Max. (at Declare Voltage) | Impeller-Cast Iron | LTB 4 - Tin : 7 to 8 %, Lead : 14 to 15 %, Nickel : 1.3 to 1.4 %, Copper : 75 to 77 % |
| Power Supply-AC | Stamping-M 45(0.5mm Thickness per Lamination & C3y Coated) | Oil Seal-N. Rubber 74.15 % |
| Frequency - 50 Hz | Nut Bolt-S.S. 410 Grade | S.S. 202 Grade-Iron 72.84 %, Chromium : 14.36 %, Copper : 1.54 %, Manganese : 9.98 % |
| Duty-S1 | Casting-Graded Cast iron | |
| | Shaft-S.S. 410 Grade | |
| | Rotor Coating-Epoxy Paint | |
| | Thrust Counter-Double | |
| | Thrust Pad-Teflon Type | |
| | S.S. Pipe-202 Grade | |
| | Winding-Close | |
| | Bushing-LTB 4 | |
| | Working Preferable Sand in Cubic Meter-400 Gram (Mini. Sand OD 600 Micron, Max. Sand OD 2000 Micron) | |
